• CH-50052590 - Resharpening of hobs

    • Resharpening of hobs in the flute.
    • The following operations are available:
      - Flute
      - Manual flute
      - K-Land along the flute (additional flute operation)
    • In order to get a straight rake face on helical hobs a specially calculated and dressed grinding wheel might be needed. The calculation of such a grinding wheel and the dressing is not included in this module.
  • CH-50052520 - Hob cam grinding

    • Cam grinding of hobs.
    • The option enables the calculation of the division as a function of the longitudinal flutes and threads, as well as the radial-axial cam grinding path.
    • The calculation was based on the grinding wheel being at the center height.
    • The suitable wheel profile is calculated with customer-specific software or software from external partners.
    • The calculation of this wheel and the dressing is not part of this module.