Lingua
Lingua

Milling cutters

back to list

  • CH-50052350 - Simple milling cutters

    • Body form: parallel and tapered.
    • Helix: right-hand helix / right-hand cutting, left-hand helix / left-hand cutting.
    • Body clearance.
    • This option is designed for re-sharpening of simple milling cutters.

  • CH-50052360 - Extension for complex milling cutters

    • Right-hand helix / left-hand cutting, left-hand helix / right-hand cutting
    • Supplementary flutes
    • Manual flutes
    • Manual tip reliefs
    • Separate division
    • Separate helix programming
    • Cylinder relief up to 50 variants
    • Manual grinding reliefs
    • Radial reliefs
    • Gash out rounding
    • S-cutting edge in ball center
    • Radius modification
    • This option demands item no. CH-50052350 (Simple milling cutters).
    • This extension is required for the production of many cutter types, such as 'two-flute cutters with supplementary flutes' or 'cutters with large corner radius'.

  • CH-50052145 - Extension for rough profile / thread production

    • With this extension, a rough or a thread profile can be ground on a cylindrical or conical cutter.
    • This option demands item no. CH-50052350 (Simple milling cutters).

  • CH-50052290 - Extension for wave grinding in production mode

    • This option demands item no. CH-50052360 (Complex milling cutters).
    • Remark: In the field of wave grinding there is a patent pending. It is the responsibility of the machine manufacturer respectively the end user to clarify the patent situation regarding the planned use of this option.

  • CH-50052570 - Extension for wave grinding in resharpening mode

    • Includes the probing of the cutting edge and resharpening of the reliefs along the wave cut.
    • This option demands item no. CH-50052360 (Complex milling cutters).

  • CH-50052430 - Extension for multi helix

    • For cylindrical milling cutters with up to 12 different helix angles.
    • This option demands item no. CH-50052360 (Complex milling cutters).

  • CH-50052580 - Extension for saw cutters

    • This option demands item no. CH-50052360 (Complex milling cutters).

  • CH-50052352 - Extension for Up-Down cutters

    • Extension for the simplified production of Up-Down Cutters with 2 to 4 teeth pro helix and two helices (one right-hand, one left-hand).
    • This option demands items no. CH-50052350 (Simple milling cutters), CH-50052360 (Extension for complex milling cutters), CH-50052430 (Extension for multi helix) and CH-50052480 (Special grinding functions)
    • Available from version 5.0